GTAW
TG-S1CML
TIG wire and rod for 1.25%Cr-0.5%Mo steel
| Features: | - Applied for ASTM A387 Gr.11, Gr.12 and equivalents
- Lower carbon content than TG-S1CM
|
|---|
| Classification: | AWS A5.28 ER80S-G |
|---|
| Shielding gas: | Ar |
|---|
| Identification color: | 1st Blue |
|---|
| Polarity: | DCEN |
|---|
Welding Positions:
Packaging data
| | Spool | Tube |
|---|
| φ mm | kg | kg | Length mm | g/piece |
|---|
| 0.8 | 10 | - | - | - | - |
| 1.0 | 10 | 20 | - | - | - |
| 1.2 | 10 | 20 | - | - | - |
| 1.6 | - | - | 5 | 1,000 | 16 |
| 2.0 | - | - | 5 | 1,000
| 25 |
| 2.4 | - | - | 5 | 1,000
| 35 |
| 3.2 | - | - | 5 | 1,000
| 63 |
| Volume mm | 240W, 110H, 230L | 280W, 110H, 270L | 40W, 35H, 1015L |
|---|
Composition (wire mass%)
| | Typical | Guarantya |
|---|
| C | 0.03 | 0.05 |
|---|
| Si | 0.47 | 0.20-0.70 |
|---|
| Mn | 1.07 | 0.80-1.30 |
|---|
| P | 0.004 | 0.025 |
|---|
| S | 0.010 | 0.025 |
|---|
| Ni | 0.02 | 0.20 |
|---|
| Cr | 1.40 | 1.00-1.50 |
|---|
| Mo | 0.51 | 0.40-0.65 |
|---|
| Cu | 0.12 | 0.35 |
|---|
| Note: aSingle values are maximium. |
All-weld mechanical properties
| | Typical | Guaranty |
|---|
| 0.2%YS (MPa) | 480 | 469min. |
|---|
| TS (MPa) | 580 | 552min. |
|---|
| EI on 4d (%) | 31 | 19min. |
|---|
| IV 0°C (J) | 300 | - |
|---|
| PWHT (°Cxh) | 620x1 | AW |
|---|
