FCAW
DW-N82
Flux cored wire
| Features: | - Suitable for Ni-based alloy of 600 and dissimilar-metal joints such as Ni-based alloy to low alloy steel and stainless steel to low alloy steel
|
|---|
| Classification: | AWS A5.34 ENiCr3T1-4 |
|---|
| Shielding gas: | Ar-CO2 |
|---|
| Polarity: | DCEP |
|---|
Welding Positions:
Packaging data
| φ mm | Spool |
|---|
| 1.2 | 12.5kg |
| Volume mm | 295W, 110H, 295L |
|---|
Composition (all-weld metal mass %)
| | Typical | Guarantya |
|---|
| C | 0.02
| 0.10 |
|---|
| Si | 0.20
| 0.50 |
|---|
| Mn | 3.0
| 2.5-3.5 |
|---|
| P | <0.01
| 0.03 |
|---|
| S | 0.003
| 0.015 |
|---|
| Ni | 71.4
| 67.0min. |
|---|
| Cr | 21.1
| 18.0-22.0 |
|---|
| Cu | <0.01
| 0.50 |
|---|
| Fe | 0.8
| 3.0 |
|---|
| Nb+Ta | 2.5
| 2.0-3.0 |
|---|
| Ti | 0.17
| 0.75 |
|---|
| Note: aSingle values are maximium. |
Welding parameters (A)
| φ mm | 1F, 1G, 2F |
|---|
| 1.2 | 150-220 |
All-weld mechanical properties
| | Typical | Guaranty |
|---|
| 0.2%YS (MPa) | 380 | - |
|---|
| TS (MPa) | 650 | 552min. |
|---|
| EI on 4d (%) | 46 | 25min. |
|---|
| IV 0°C (J) | 128 | - |
|---|
