GTAW
TG-S709S
Filler rod and wire
| Features: | |
|---|
| Classification: | AWS A5.14 ERNiMo-8 |
|---|
| Shielding gas: | Ar |
|---|
| Identification color: | 1st Orange |
|---|
| Polarity: | DCEN |
|---|
Welding Positions:
Packaging data
| Spool | Tube |
|---|
| φ mm | kg | kg | Length mm | g/piece |
|---|
| 1.2 | 10 | 15 | 20 | 5 | 1,000 | 11 |
| 1.6 | 10 | 15 | - | 5 | 1,000 | 19 |
| 2.0 | - | - | - | 5 | 1,000 | 29 |
| 2.4 | - | - | - | 5 | 1,000 | 42 |
| Volume mm | 240W, 110H, 240L | 285W, 110H, 285L | 40W, 35H, 1015L |
|---|
Composition (rod and wire mass%)
| | Typical | Guarantya |
|---|
| C | 0.02 | 0.10 |
|---|
| Si | 0.02 | 0.50 |
|---|
| Mn | <0.1 | 1.0 |
|---|
| P | 0.001 | 0.015 |
|---|
| S | 0.001 | 0.015 |
|---|
| Ni | 69.8 | 60.0min. |
|---|
| Cr | 2.0 | 0.5-3.5 |
|---|
| Mo | 19.1 | 18.0-21.0 |
|---|
| W | 3.0 | 2.0-4.0 |
|---|
| Fe | 5.6 | 10.0 |
|---|
| Cu | 0.01 | 0.50 |
|---|
| Note: aSingle values are maximium. |
All-weld mechanical properties
| | Typical | Guaranty |
|---|
| 0.2%YS (MPa) | 460 | - |
|---|
| TS (MPa) | 730 | 660min. |
|---|
| EI on 4d (%) | 47 | 25min. |
|---|
| IV -196°C (J) | 160 | - |
|---|
| ABS | MG(AWS A5.14 ERNiMo-8) |
|---|
| LR | 9Nim
|
|---|
| DNV | MS(9Ni) |
|---|
| BV | Equivalent to AWS
A5.14 ERNiMo-8
|
|---|
| NK | KSWL92G(I) |
|---|
