SMAW
LB-106
Stick electrode
| Features: | - Suitable for 690MPa tensile strength steel
|
|---|
| Classification: | AWS A5.5 E10016-G |
|---|
| Redrying Conditions: | 350-400°Cx1h |
|---|
| Identification color: | 1st Blue white, 2nd Purple |
|---|
| Polarity: | AC |
|---|
Welding Positions:
Packaging data
| φ mm | Length mm | kg/pack | kg/carton | g/piece | carton mm |
|---|
| 3.2 | 350 | 5 | 20 | 31 | 170W, 120H, 380L |
| 4.0 | 400 | 5 | 20 | 55 | 170W, 105H, 430L |
| 5.0 | 400 | 5 | 20 | 85 | 170W, 105H, 430L |
Composition (all-weld metal mass %)
| | Typical | Guarantya |
|---|
| C | 0.08 | 0.09 |
|---|
| Si | 0.65 | 0.40-0.75 |
|---|
| Mn | 1.29 | 1.20-1.70 |
|---|
| P | 0.01 | 0.03 |
|---|
| S | <0.01 | 0.03 |
|---|
| Ni | 1.44 | 1.20-1.70 |
|---|
| Cr | 0.22 | 0.10-0.30 |
|---|
| Mo | 0.19 | 0.10-0.30 |
|---|
| Note: aSingle values are maximium. |
Welding parameters (A)
| φ mm | 1F, 1G, 2F, 2G | 3G uphill, 4G |
|---|
| 3.2 | 90-130 | 80-115 |
| 4.0 | 130-180 | 110-170 |
| 5.0 | 180-240 | 150-220 |
All-weld mechanical properties
| | Typical | Guaranty |
|---|
| 0.2%YS (MPa) | 660 | 600min. |
|---|
| TS (MPa) | 760 | 690min. |
|---|
| EI on 4d (%) | 25 | 16min. |
|---|
| IV -20°C (J) | 110 | 27min. |
|---|
| ABS | MG(AWS A5.5 E10016-G) |
|---|
| NK | KMW3Y62 H5 |
|---|
| CR | MG (E10016-G)
|
|---|
