GMAW
MG-S80
Solid wire
| Features: | - Suitable for 780MPa tensile strength steel
|
|---|
| Classification: | AWS A5.28 ER110S-G |
|---|
| Shielding gas: | Ar-5-25%CO2 |
|---|
| Polarity: | DCEP |
|---|
Welding Positions:
Packaging data
| φ mm | Spool |
|---|
| 1.2 | 20kg |
| Volume mm | 300W, 110H, 300L |
|---|
Composition (wire mass%)
| | Typical | Guarantya |
|---|
| C | 0.05
| 0.12
|
|---|
| Si | 0.51
| 0.20~0.70
|
|---|
| Mn | 1.37
| 1.10~1.70
|
|---|
| P | 0.011
| 0.025
|
|---|
| S | 0.002
| 0.025
|
|---|
| Ni | 2.64
| 2.40~2.90
|
|---|
| Cr | 0.16
| 0.05~0.35
|
|---|
| Mo | 0.47
| 0.35~0.70
|
|---|
| Ti | 0.11
| 0.02~0.30
|
|---|
| Cu | 0.22
| 0.50
|
|---|
| Note: aSingle values are maximium. |
Welding parameters (A)
| φ mm | 1F, 1G, 2F, 2G | 3G uphill, 4G |
|---|
| 1.2 | 80-300 | 50-180 |
All-weld mechanical properties
| | Typical | Guaranty |
|---|
| 0.2%YS (MPa) | 770 | 665min. |
|---|
| TS (MPa) | 850 | 759min. |
|---|
| EI on 4d (%) | 20 | 15min. |
|---|
| IV -40°C (J) | 80 | 27min. |
|---|
| SG | Ar-20%CO2 | Ar-20%CO2 |
|---|
| ABS | MG |
|---|
| DNV | ⅣY69MS |
|---|
| NK | KSW4Y69G (M2) |
|---|
