FCAW
MX-100T
Flux cored wire
| Features: | - Suitable for thin plates (e.g., 0.8mm)
- Excellent arc stability in low current range (50~180A) for short circuiting welding
|
|---|
| Classification: | AWS A5.18 E70C-6C/6M |
|---|
| Shielding gas: | CO2 or Ar-CO2 |
|---|
| Polarity: | DCEP |
|---|
Welding Positions:
Packaging data
| φ mm | Spool | Drum |
|---|
| 1.2 | 20kg | 250kg |
| 1.4 | 20kg | 250kg |
| Volume mm | 300W, 110H, 300L | 530φ, 820H |
|---|
Composition (all-weld metal mass %)
| | Typical (CO2) | Guarantya |
|---|
| C | 0.08 | 0.12 |
|---|
| Si | 0.49 | 0.90 |
|---|
| Mn | 1.53 | 1.75 |
|---|
| P | 0.01 | 0.03 |
|---|
| S | 0.01 | 0.03 |
|---|
| Ni | 0.01 | 0.50 |
|---|
| Cr | 0.02 | 0.20 |
|---|
| Mo | 0.01 | 0.30 |
|---|
| V | <0.01 | 0.08 |
|---|
| Cu | 0.02 | 0.50 |
|---|
| Note: aSingle values are maximium. |
Welding parameters (A)
| φ mm | 1F, 1G, 2F, 2G | 3G uphill, 4G |
|---|
| 1.2 | 50-300 | 50-180 |
| 1.4 | 80-400 | 70-180 |
All-weld mechanical properties
| | Typical (CO2) | Guaranty |
|---|
| 0.2%YS (MPa) | 480 | 400min. |
|---|
| TS (MPa) | 560 | 490min. |
|---|
| EI on 4d (%) | 31 | 22min. |
|---|
| IV -29°C (J) | 62 | 27min. |
|---|
| CO2
| Ar-CO2 |
|---|
| ABS | 3YSA,H5
| - |
|---|
| LR | 3YS,H5 |
|---|
| DNV | ⅢYMS(H5) |
|---|
| BV | SA3YM(H5) |
|---|
| CR | 3YS-HH
| -
|
|---|
