FCAW
MX-200E
Flux cored wire
| Features: | - Excellent porosity resistibility to inorganic zinc primer
- Excellent impact value at low temperatures down to -29°C
|
|---|
| Classification: | AWS A5.20 E70T-9C |
|---|
| Shielding gas: | CO2 |
|---|
| Polarity: | DCEP |
|---|
Welding Positions:
Packaging data
| φ mm | Spool |
|---|
| 1.2 | 15kg, 20kg |
| Volume mm | 300W, 110H, 300L |
|---|
Composition (all-weld metal mass %)
| | Typical | Guarantya |
|---|
| C | 0.04 | 0.12 |
|---|
| Si | 0.51 | 0.90 |
|---|
| Mn | 1.48 | 1.75 |
|---|
| P | 0.01 | 0.03 |
|---|
| S | 0.01 | 0.03 |
|---|
| Ni | 0.01 | 0.50 |
|---|
| Cr | 0.03 | 0.20 |
|---|
| Mo | 0.01 | 0.30 |
|---|
| V | 0.01 | 0.08 |
|---|
| Cu | 0.02 | 0.35 |
|---|
| Note: aSingle values are maximium. |
Welding parameters (A)
| φ mm | 1F, 1G | 2F |
|---|
| 1.2 | 150-300 | 180-300 |
All-weld mechanical properties
| | Typical | Guaranty |
|---|
| 0.2%YS (MPa) | 540 | 400min. |
|---|
| TS (MPa) | 600 | 490-655 |
|---|
| EI on 4d (%) | 30 | 22min. |
|---|
| IV -29°C (J) | 70 | 27min. |
|---|
| ABS | 4Y400SA, H5 |
|---|
| LR | 4Y40S, H5 |
|---|
| DNV | ⅣY40MS, H5 |
|---|
| BV | SA4Y40M, H5 |
|---|
| NK | KSW54Y40G (C), H5 |
|---|
