FCAW
DW-308LP-XR
Flux cored wire
| Features: | Applied for 304L type stainless steel
Low Cr (Ⅵ) stainless steel flux cored wire |
|---|
| Classification: | AWS A5.22 E308LT1-1/4 |
|---|
| Shielding gas: | CO2 or Ar-CO2 |
|---|
| Polarity: | DCEP |
|---|
Welding Positions:
Packaging data
| φ mm | Spool |
|---|
| 1.2 | 12.5kg |
| Volume mm | 295W, 110H, 295L |
|---|
Composition (wire mass%)
|
| Typical (Ar-CO2) | Guarantya
|
|---|
| C | 0.03 | 0.04 |
|---|
| Si | 0.8 | 1.0 |
|---|
| Mn | 1.8 | 0.5~2.5 |
|---|
| P | 0.02 | 0.04 |
|---|
| S | <0.01 | 0.03 |
|---|
| Ni | 10.4 | 9.0~11.0 |
|---|
| Cr | 19.5 | 18.0~21.0 |
|---|
| Mo | 0.02 | 0.75 |
|---|
| Cu | 0.04 | 0.75 |
|---|
Note: aSingle values are maximium.
|
Welding parameters (A)
| φ mm | 1F, 1G, 2F | 2G | 3G uphill | 4G |
|---|
| 1.2 | 130~270 | 150~220 | 130~220 | 150~200 |
All-weld mechanical properties
| Typical (Ar-CO2) | Guaranty |
|---|
| 0.2%YS (MPa) | 386 | - |
|---|
| TS (MPa) | 551 | 518min. |
|---|
| El on 4d (%) | 42 | 30min. |
|---|
| ABS* | MG（AWS A5.22 E308LT1-4） |
|---|
| CWB | E308LT1-1, E308LT1-4 |
|---|
Note: *Ar-25%CO2
|
