Welding Handbook Quick View

SAW

PF-S1D / US-2209

Flux and wire combination for duplex stainless
Features:
  • Suitable for normal duplex stainless steel (S32205, S31803, etc)
    • Classification:AWS A5.9 ER2209 (Wire only)
    Type of flux:Bonded
    Redrying of flux:200～300℃×1h
    Welding Positions: Canvas is Not Supported.

    Packaging data

    FluxMeshCan
    PF-S1D12×6520kg
    Volume mm240W, 350H, 240L
    Wireφ mmSpoolCoil
    US-22091.2
    1.6
    2.4
    		-
    10kg
    10kg
    		15kg
    15kg
    15kg
    		-
    -
    25kg
    Volume mm240W, 110H, 240L
    		285W, 110H, 285L430W, 90H, 430L

    Composition (wire mass%)


    		TypicalGuarantya
    C0.020.03
    Si0.360.90
    Mn1.420.50~2.00
    P0.010.03
    S<0.010.03
    Ni8.97.5~9.5
    Cr23.321.5~23.5
    Mo3.32.5~3.5
    Cu0.160.75
    N0.150.08~0.20
    Note: aSingle values are maximium.

    Composition (all-weld metal mass %)


    		Typical
    C0.02
    Si0.30
    Mn1.66
    P0.02
    S<0.01
    Ni9.0
    Cr23.1
    Mo3.3
    Cu0.16
    N0.14

    All-weld mechanical properties


    		Typical
    0.2%YS (MPa)618
    TS (MPa)798
    El on 4d (%)29
    IV -40℃ (J)61

    Approvals / Click here for certificates

    LRS31803T, S31803M(Chem)
    DNVMG
    BV2205TM
    CCS2205

    Click here for SDS

    Page Top

    Products