Welding Handbook Quick View
SAW
MF-300/ US-36
SAW flux and wire combination
| Features: |
|
|---|---|
| Classification: | AWS A5.17 F7A6-EH14, F7P6-EH14 |
| Type of flux: | Fused |
| Redrying of flux: | 150-350°Cx1h |
| Polarity: | AC |
Welding Positions:
Packaging data
| Flux | Mesh | Can | |||||
|---|---|---|---|---|---|---|---|
| MF-300 | 20x200 20xD | 25kg 25kg | |||||
| Volume mm | 240W, 350H, 240L | ||||||
| Wire | φ mm | Spool | Coil | Drum | |||
| US-36 | 1.6 | 10kg | 20kg | - | - | - | - |
| 2.0 | 10kg | 20kg | - | - | - | - | |
| 2.4 | 10kg | - | 25kg | 76kg | - | 300kg | |
| 3.2 | - | - | 25kg | 76kg | - | 300kg | |
| 4.0 | - | - | 25kg | 75kg | 150kg | 300kg | |
| 4.8 | - | - | 25kg | 75kg | 150kg | - | |
| 6.4 | - | - | 25kg | 78kg | 159kg | - | |
| Volume mm | 240W, 110H, 240L | 300W, 110H, 300L | 430W, 90H, 430L | 740W, 110H, 740L | 840W, 110H, 840L | 680φ, 770H(2.4φmm) 600φ, 920H(3.2,4.0φmm) | |
Composition (wire mass%)
| Typical | Guarantya | |
|---|---|---|
| C | 0.12 | 0.10-0.20 |
| Si | 0.03 | 0.10 |
| Mn | 1.95 | 1.70-2.20 |
| P | 0.013 | 0.030 |
| S | 0.005 | 0.030 |
| Cu | 0.11 | 0.35 |
| Note: aSingle values are maximium. | ||
Composition (weld metal mass %)
| Typical | |
|---|---|
| C | 0.09 |
| Si | 0.23 |
| Mn | 1.62 |
| P | 0.014 |
| S | 0.007 |
Weld mechanical properties
| Typical | Guaranty | |||
|---|---|---|---|---|
| 0.2%YS (MPa) | 470 | 410 | 400min. | 400min. |
| TS (MPa) | 570 | 520 | 483-655 | 483-655 |
| EI on 4d (%) | 30 | 31 | 22min. | 22min. |
| IV -51°C (J) | 90 | 82 | 27min. | 27min. |
| PWHT (°Cxh) | AW | 620x1 | AW | 620±15x1 |
Approvals / Click here for certificates
| NK | KAW52T |
|---|
Products
- Main Products
- Welding Consumables
- Arc welding robots
- Industries - Recommended Materials
- Welding Handbook Quick View
- Product Quick View & Highlights
- For HEAT-RESISTANT STEEL
- For STAINLESS STEEL
- For LOW-TEMPERATURE STEEL
- Product Highlight
- Catalog
- Technical Highlights
- Certification
- SDS ※English Only
- ARCMAN
- Welding Robot
- Software
