SMAW
CM-A96
Stick electrode for 1-1.25%Cr-0.5%Mo steel
| Features: | - Applied for ASTM A387 Gr.11, Gr.12 and equivalents
|
|---|
| Classification: | AWS A5.5 E8016-B2 |
|---|
| Redrying Conditions: | 325-375°Cx1h |
|---|
| Identification color: | 1st Sillver,2nd Black |
|---|
| Polarity: | AC, DCEP |
|---|
Welding Positions:
Packaging data
| φ mm | Length mm | kg/pack | kg/carton | g/piece | carton mm |
|---|
| 2.6 | 300 | 2 | 20 | 17 | 270W, 85H, 330L |
| 3.2 | 350 | 5 | 20 | 29 | 170W, 110H, 380L |
| 4.0 | 400 | 5 | 20 | 53 | 170W, 115H, 430L |
| 5.0 | 400 | 5 | 20 | 82 | 170W, 120H, 430L |
| 6.0 | 400 | 5 | 20 | 122 | 170W, 120H, 430L |
Composition (all-weld metal mass %)
| | Typical (AC) | Guarantya |
|---|
| C | 0.06 | 0.05-0.12 |
|---|
| Si | 0.48 | 0.60 |
|---|
| Mn | 0.81 | 0.90 |
|---|
| P | 0.01 | 0.03 |
|---|
| S | <0.01 | 0.03 |
|---|
| Cr | 1.31 | 1.00-1.50 |
|---|
| Mo | 0.55 | 0.40-0.65 |
|---|
| Note: aSingle values are maximium. |
Welding parameters (A)
| φ mm | 1F, 1G, 2F, 2G | 3G uphill, 4G |
|---|
| 2.6 | 55-85 | 50-80 |
| 3.2 | 80-120 | 75-110 |
| 4.0 | 125-175 | 100-160 |
| 5.0 | 185-235 | - |
| 6.0 | 240-300 | - |
All-weld mechanical properties
| | Typical (AC) | Guaranty |
|---|
| Temp. (°C) | RT | 450 | RT |
|---|
| 0.2%YS (MPa) | 570 | 460 | 462min.
|
|---|
| TS (MPa) | 650 | 520 | 552min. |
|---|
| EI on 4d (%) | 26 | 21 | 19min. |
|---|
| IV 0°C (J) | 210 | - | - |
|---|
| PWHT (°Cxh) | 690x1 | 690x1
| 690±15x1
|
|---|
| ABS | MG(AWS A5.5 E8016-B2) |
|---|
| LR | MG
|
|---|
| DNV | MG(VL1Cr0.5Mo),H10 |
|---|
| BV | UP(E8016-B2) |
|---|
| NK | MG(AWS A5.5 E8016-B2)
|
|---|
